Администрирование → Общие → МакросыДанный шаблон не актуален
Прошло много времени с момента, когда приходилось делать свои шаблоны для серверов HP. Теперь есть отличный официальный. С поддержкой почти всей линейки и низкоуровневым обнаружением: https://git.zabbix.com/projects/ZBX/repos/zabbix/browse/templates/server (там есть несколько под конкретные модели (bl-dl, папка «HP») или общий (папка «hp_ilo_snmp»))
Универсальный шаблон для мониторинга серверного парка от Hewlett-Packard. Наблюдает любые модели серверов (например ProLiant BL460c Gen8, ProLiant BL460c G7, ProLiant DL160 G6, ProLiant DL580 G5, ProLiant ML350 G5, ). В шаблоне используется низкоуровневое обнаружение (low-level discovery), посредством которого в автоматическом режиме обнаруживаются следующие элементы наблюдения:
{$SNMP_COMMUNITY}1), в котором необходимо указать имя SNMP community (обычно public);
Для корректной работы шаблона, рекомендуется добавить преобразование значений. Администрирование → Общие → Преобразование значений:
| Имя | Преобразование значений |
|---|---|
| HP SNMP Agent Condition | 1 ⇒ other |
| 2 ⇒ ok | |
| 3 ⇒ degraded | |
| 4 ⇒ failed | |
| HP SNMP Agent Locale | 1 ⇒ other |
| 2 ⇒ unknow | |
| 3 ⇒ system | |
| 4 ⇒ systemBoard | |
| 5 ⇒ ioBoard | |
| 6 ⇒ cpu | |
| 7 ⇒ memory | |
| 8 ⇒ storage | |
| 9 ⇒ removableMedia | |
| 10 ⇒ powerSupply | |
| 11 ⇒ ambient | |
| 12 ⇒ chassis | |
| 13 ⇒ bridgeCard | |
| 14 ⇒ managementBoard | |
| 15 ⇒ backplane | |
| 16 ⇒ networkSlot | |
| 17 ⇒ bladeSlot | |
| 18 ⇒ virtual | |
| HP SNMP Agent LogDrv Status | 1 ⇒ other |
| 2 ⇒ ok | |
| 3 ⇒ failed | |
| 4 ⇒ unconfigured | |
| 5 ⇒ recovering | |
| 6 ⇒ readyForRebuild | |
| 7 ⇒ rebuilding | |
| 8 ⇒ wrongDrive | |
| 9 ⇒ badConnect | |
| 10 ⇒ overheating | |
| 11 ⇒ shutdown | |
| 12 ⇒ expanding | |
| 13 ⇒ notAvailable | |
| 14 ⇒ queuedForExpansion | |
| 15 ⇒ multipathAccessDegraded | |
| 16 ⇒ erasing | |
| HP SNMP Agent PhyDrv Status | 1 ⇒ other |
| 2 ⇒ ok | |
| 3 ⇒ failed | |
| 4 ⇒ predictiveFailure | |
| 5 ⇒ erasing | |
| 6 ⇒ eraseDone | |
| 7 ⇒ eraseQueued | |
| 8 ⇒ ssdWear | |
| HP SNMP Agent Write Cache State | 1 ⇒ other |
| 2 ⇒ disabled | |
| 3 ⇒ enabled | |
| HP SNMP Logical Drive Fault Tolerance | 1 ⇒ other |
| 2 ⇒ none | |
| 3 ⇒ mirroring | |
| 4 ⇒ data guard | |
| 5 ⇒ distributed data guard | |
| 7 ⇒ advanced data guarding |
<?xml version="1.0" encoding="UTF-8"?> <zabbix_export> <version>2.0</version> <date>2015-09-24T07:06:13Z</date> <groups> <group> <name>HP Servers</name> </group> </groups> <templates> <template> <template>Template SNMP HP Server Summary exp</template> <name>Template SNMP HP Server Summary exp</name> <description/> <groups> <group> <name>HP Servers</name> </group> </groups> <applications> <application> <name>HP Array Controller</name> </application> <application> <name>HP Fan Summary</name> </application> <application> <name>HP Logical Drive</name> </application> <application> <name>HP Physical Drive</name> </application> <application> <name>HP System Summary</name> </application> <application> <name>HP Temperature Sensor</name> </application> <application> <name>HP Termal Summary</name> </application> </applications> <items> <item> <name>Cpu Fun(s) Status</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.5.0</snmp_oid> <key>cpqHeThermalCpuFanStatus.0</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The status of the processor fan(s) in the system. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) All fans are operating properly. failed(4) A fan is not operating properly. The system will be shutdown if the failed(4) condition occurs.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Termal Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item> <item> <name>Resilient Memory Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.14.4.0</snmp_oid> <key>cpqHeResilientMemCondition.0</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>This value specifies the current condition of the Advanced Memory Protection subsystem. The following states are supported: other(1) The system does not support fault tolerant memory or the state cannot be determined by the Management Agent. ok(2) This system is operating normally. degraded(3) The system is running in a degraded state because the Advanced Memory Protection subsystem has been engaged.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP System Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item> <item> <name>Server Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.1.3.0</snmp_oid> <key>cpqHeMibCondition.0</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The overall condition. This object represents the overall status of the server health system represented by this MIB.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP System Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item> <item> <name>System Fun(s) Status</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.4.0</snmp_oid> <key>cpqHeThermalSystemFanStatus.0</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The status of the fan(s) in the system. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) All fans are operating properly. degraded(3) A non-required fan is not operating properly. failed(4) A required fan is not operating properly. If the cpqHeThermalDegradedAction is set to shutdown(3) the system will be shutdown if the failed(4) condition occurs.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Termal Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item> <item> <name>System Temperature Status</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.3.0</snmp_oid> <key>cpqHeThermalTempStatus.0</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The status of the system's temperature sensors: This value will be one of the following: other(1) Temp sensing is not supported by this system or driver. ok(2) All temp sensors are within normal operating range. degraded(3) A temp sensor is outside of normal operating range. failed(4) A temp sensor detects a condition that could permanently damage the system. The system will automatically shutdown if the failed(4) condition results, so it is unlikely that this value will ever be returned by the agent. If the cpqHeThermalDegradedAction is set to shutdown(3) the system will be shutdown if the degraded(3) condition occurs.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Termal Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item> <item> <name>Termal Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.1.0</snmp_oid> <key>cpqHeThermalCondition.0</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>This value specifies the overall condition of the system's thermal environment.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Termal Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item> </items> <discovery_rules> <discovery_rule> <name>Array Controller Index</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.3.2.2.1.1.1</snmp_oid> <key>snmp.discovery.v1</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description>Array Controller Index. This value is a logical number whose meaning is OS dependent. Each physical controller has one unique controller number associated with it.</description> <item_prototypes> <item_prototype> <name>Drive Array Controller {#SNMPINDEX} Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.3.2.2.1.1.6.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrCondition.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Array Controller</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Controller {#SNMPINDEX} Firmware Revision</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrFWRev.["{#SNMPINDEX}"]</key> <delay>9600</delay> <history>7</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Array Controller Firmware Revision. The firmware revision of the drive array controller. This value can be used to help identify a particular revision of the controller.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Array Controller</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Controller {#SNMPINDEX} Model</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.2.1.1.2.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrModel.["{#SNMPINDEX}"]</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Array Controller Model. The type of controller card.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Array Controller</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template SNMP HP Server Summary exp:cpqDaCntlrCondition.["{#SNMPINDEX}"].last(0)}<>2</expression> <name>{HOST.NAME}: Drive Array Controller {#SNMPINDEX} Condition is Not OK</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>Drive Array Logical Drive Performance</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.3.2.8.1.1.1</snmp_oid> <key>snmp.discovery.v5</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description/> <item_prototypes> <item_prototype> <name>Drive Array Logical Drive {#SNMPINDEX} Avg Queue Depth</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.8.1.1.5.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvPerfAvgQueueDepth.["{#SNMPINDEX}"]</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Array Logical Drive Performance Monitor Average Queue Depth. This value indicates the average command queue depth of the logical volume.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Logical Drive</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes/> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>Drive Array Logical Drive Summary</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.3.2.3.1.1.2</snmp_oid> <key>snmp.discovery.v4</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description/> <item_prototypes> <item_prototype> <name>Drive Array Logical Drive {#SNMPINDEX} Avg Latency</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>1</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.7.1.1.7.{#SNMPINDEX}</snmp_oid> <key>cpqDaCntlrPerfAvgLatency.["{#SNMPINDEX}"]</key> <delay>60</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>0</value_type> <allowed_hosts/> <units>ms</units> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>0.01</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Array Controller Performance Monitor Average Command Latency. This value shows the average command latency for this sample in 1/10,000 second units.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Logical Drive</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Logical Drive {#SNMPINDEX} Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.3.2.3.1.1.11.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvCondition.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The Logical Drive condition. This value represents the overall condition of this logical drive and any associated physical drives.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Logical Drive</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Logical Drive {#SNMPINDEX} Fault Tolerance</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.3.1.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvFaultTol.["{#SNMPINDEX}"]</key> <delay>7200</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. The following values are valid for the Logical Drive Fault Tolerance: None (2) Fault tolerance is not enabled. If a physical drive reports an error, the data cannot be recovered by the drive array controller. Mirroring (3) For each physical drive, there is a second physical drive containing identical data. If a drive fails, the data can be retrieved from the mirror drive. Data Guard (4) One of the physical drives is used as a data guard drive and contains the exclusive OR of the data on the remaining drives. If a failure is detected, the drive array controller rebuilds the data using the data guard information plus information from the other drives. Distributed Data Guard (5) Distributed Data Guarding, sometimes referred to as RAID 5, is similar to Data Guarding, but instead of storing the parity information on one drive, the information is distributed across all of the drives. If a failure is detected, the drive array controller rebuilds the data using the data guard information from all the drives. Advanced Data Guarding (7) Advanced Data Guarding (RAID ADG) is the fault tolerance method that provides the highest level of data protection. It 'stripes' data and parity across all the physical drives in the configuration to ensure the uninterrupted availability of uncorrupted data. This fault-tolerance method is similar to distributed data guard (RAID 5) in that parity data is distributed across all drives in the array, except in RAID ADG the capacity of multiple drives is used to store parity data. Assuming the capacity of 2 drives is used for parity data, this allows continued operation despite simultaneous failure of any 2 drives in the array, whereas RAID 4 and RAID 5 can only sustain failure of a single drive.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Logical Drive</name> </application> </applications> <valuemap> <name>HP SNMP Logical Drive Fault Tolerance</name> </valuemap> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Logical Drive {#SNMPINDEX} Status</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.3.1.1.4.{#SNMPINDEX}</snmp_oid> <key>cpqDaLogDrvStatus.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Logical Drive Status. The logical drive can be in one of the following states: Ok (2) Indicates that the logical drive is in normal operation mode. Failed (3) Indicates that more physical drives have failed than the fault tolerance mode of the logical drive can handle without data loss. Unconfigured (4) Indicates that the logical drive is not configured. Recovering (5) Indicates that the logical drive is using Interim Recovery Mode. In Interim Recovery Mode, at least one physical drive has failed, but the logical drive's fault tolerance mode lets the drive continue to operate with no data loss. Ready Rebuild (6) Indicates that the logical drive is ready for Automatic Data Recovery. The physical drive that failed has been replaced, but the logical drive is still operating in Interim Recovery Mode. Rebuilding (7) Indicates that the logical drive is currently doing Automatic Data Recovery. During Automatic Data Recovery, fault tolerance algorithms restore data to the replacement drive. Wrong Drive (8) Indicates that the wrong physical drive was replaced after a physical drive failure. Bad Connect (9) Indicates that a physical drive is not responding. Overheating (10) Indicates that the drive array enclosure that contains the logical drive is overheating. The drive array is still functioning, but should be shutdown. Shutdown (11) Indicates that the drive array enclosure that contains the logical drive has overheated. The logical drive is no longer functioning. Expanding (12) Indicates that the logical drive is currently doing Automatic Data Expansion. During Automatic Data Expansion, fault tolerance algorithms redistribute logical drive data to the newly added physical drive. Not Available (13) Indicates that the logical drive is currently unavailable. If a logical drive is expanding and the new configuration frees additional disk space, this free space can be configured into another logical volume. If this is done, the new volume will be set to not available. Queued For Expansion (14) Indicates that the logical drive is ready for Automatic Data Expansion. The logical drive is in the queue for expansion.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Logical Drive</name> </application> </applications> <valuemap> <name>HP SNMP Agent LogDrv Status</name> </valuemap> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template SNMP HP Server Summary exp:cpqDaLogDrvStatus.["{#SNMPINDEX}"].last(0)}>2</expression> <name>{HOST.NAME}: Drive Array Logical Drive {#SNMPINDEX} Status Changed</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>Drive Array Physical Drive Summary</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.3.2.5.1.1.2</snmp_oid> <key>snmp.discovery</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description/> <item_prototypes> <item_prototype> <name>Drive Array Physical Drive {#SNMPINDEX} Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.37.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvCondition.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Physical Drive</name> </application> </applications> <valuemap> <name>HP SNMP Agent PhyDrv Status</name> </valuemap> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Physical Drive {#SNMPINDEX} Reads/Sec</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.11.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvReads.["{#SNMPINDEX}"]</key> <delay>60</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>reads/s</units> <delta>1</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Physical Drive</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Physical Drive {#SNMPINDEX} Status</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.6.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvStatus.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>Physical Drive Status. This shows the status of the physical drive. The following values are valid for the physical drive status: Other (1) Indicates that the instrument agent does not recognize the drive. You may need to upgrade your instrument agent and/or driver software. Ok (2) Indicates the drive is functioning properly. Failed (3) Indicates that the drive is no longer operating and should be replaced. Predictive Failure(4) Indicates that the drive has a predictive failure error and should be replaced. Erasing(5) Indicates that the drive is being erased. Erase Done(6) Indicates that the drive has been erased and is now in an offline state. Erase Queued(7) Indicates that an erase operation is currently queued for the drive.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Physical Drive</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> <item_prototype> <name>Drive Array Physical Drive {#SNMPINDEX} Writes/Sec</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.3.2.5.1.1.13.{#SNMPINDEX}</snmp_oid> <key>cpqDaPhyDrvWrites.["{#SNMPINDEX}"]</key> <delay>60</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units>writes/s</units> <delta>1</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Physical Drive</name> </application> </applications> <valuemap/> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template SNMP HP Server Summary exp:cpqDaPhyDrvCondition.["{#SNMPINDEX}"].last(0)}<>2</expression> <name>{HOST.NAME}: Drive Array Physical Drive {#SNMPINDEX} Condition is Not OK</name> <url/> <status>0</status> <priority>4</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes> <graph_prototype> <name>Drive Array Physical Drive {#SNMPINDEX} Writes and Reads/Sec</name> <width>900</width> <height>200</height> <yaxismin>0.0000</yaxismin> <yaxismax>100.0000</yaxismax> <show_work_period>1</show_work_period> <show_triggers>1</show_triggers> <type>0</type> <show_legend>1</show_legend> <show_3d>0</show_3d> <percent_left>0.0000</percent_left> <percent_right>0.0000</percent_right> <ymin_type_1>0</ymin_type_1> <ymax_type_1>0</ymax_type_1> <ymin_item_1>0</ymin_item_1> <ymax_item_1>0</ymax_item_1> <graph_items> <graph_item> <sortorder>0</sortorder> <drawtype>5</drawtype> <color>3333FF</color> <yaxisside>0</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template SNMP HP Server Summary exp</host> <key>cpqDaPhyDrvReads.["{#SNMPINDEX}"]</key> </item> </graph_item> <graph_item> <sortorder>1</sortorder> <drawtype>5</drawtype> <color>00C800</color> <yaxisside>0</yaxisside> <calc_fnc>2</calc_fnc> <type>0</type> <item> <host>Template SNMP HP Server Summary exp</host> <key>cpqDaPhyDrvWrites.["{#SNMPINDEX}"]</key> </item> </graph_item> </graph_items> </graph_prototype> </graph_prototypes> <host_prototypes/> </discovery_rule> <discovery_rule> <name>Fault Tolerant Fan Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.7.1.2</snmp_oid> <key>snmp.discovery.v2</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description/> <item_prototypes> <item_prototype> <name>Fault Tolerant Fan {#SNMPINDEX} Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.6.2.6.7.1.9.{#SNMPINDEX}</snmp_oid> <key>cpqHeFltTolFanCondition.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>7</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The condition of the fan. This value will be one of the following: other(1) Fan status detection is not supported by this system or driver. ok(2) The fan is operating properly. degraded(2) A redundant fan is not operating properly. failed(4) A non-redundant fan is not operating properly.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Fan Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item_prototype> <item_prototype> <name>Fault Tolerant Fan {#SNMPINDEX} Locale</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.7.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqHeFltTolFanLocale.["{#SNMPINDEX}"]</key> <delay>86400</delay> <history>7</history> <trends>30</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>This specifies the location of the fan in the system.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Fan Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Locale</name> </valuemap> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes/> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>Power Supply Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.6.2.9.3.1.2</snmp_oid> <key>snmp.discovery.v6</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description/> <item_prototypes> <item_prototype> <name>Power Supply {#SNMPINDEX} Condition</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.9.3.1.4.{#SNMPINDEX}</snmp_oid> <key>cpqHeFltTolPowerSupplyCondition.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>90</history> <trends>365</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The condition of the power supply. This value will be one of the following: other(1) The status could not be determined or not present. ok(2) The power supply is operating normally. degraded(3) A temperature sensor, fan or other power supply component is outside of normal operating range. failed(4) A power supply component detects a condition that could permanently damage the system.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP System Summary</name> </application> </applications> <valuemap> <name>HP SNMP Agent Condition</name> </valuemap> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes> <trigger_prototype> <expression>{Template SNMP HP Server Summary exp:cpqHeFltTolPowerSupplyCondition.["{#SNMPINDEX}"].last()}<>2 and {Template SNMP HP Server Summary exp:cpqHeFltTolPowerSupplyCondition.["{#SNMPINDEX}"].last()}<>1</expression> <name>{HOST.NAME}: Power Supply {#SNMPINDEX} Condition is Not OK</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> </trigger_prototype> </trigger_prototypes> <graph_prototypes/> <host_prototypes/> </discovery_rule> <discovery_rule> <name>Temperature Sensor</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.2</snmp_oid> <key>snmp.discovery.v3</key> <delay>3600</delay> <status>0</status> <allowed_hosts/> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <delay_flex/> <params/> <ipmi_sensor/> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <filter> <evaltype>0</evaltype> <formula/> <conditions/> </filter> <lifetime>7</lifetime> <description/> <item_prototypes> <item_prototype> <name>Temperature Sensor {#SNMPINDEX} Celsius</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.4.{#SNMPINDEX}</snmp_oid> <key>cpqHeTemperatureCelsius.["{#SNMPINDEX}"]</key> <delay>600</delay> <history>7</history> <trends>30</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Temperature Sensor</name> </application> </applications> <valuemap> <name>HP SNMP Agent Locale</name> </valuemap> <logtimefmt/> </item_prototype> <item_prototype> <name>Temperature Sensor {#SNMPINDEX} Locate</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.6.2.6.8.1.3.{#SNMPINDEX}</snmp_oid> <key>cpqHeTemperatureLocale.["{#SNMPINDEX}"]</key> <delay>86400</delay> <history>7</history> <trends>30</trends> <status>0</status> <value_type>3</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_contextname/> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authprotocol>0</snmpv3_authprotocol> <snmpv3_authpassphrase/> <snmpv3_privprotocol>0</snmpv3_privprotocol> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Temperature Sensor</name> </application> </applications> <valuemap> <name>HP SNMP Agent Locale</name> </valuemap> <logtimefmt/> </item_prototype> </item_prototypes> <trigger_prototypes/> <graph_prototypes/> <host_prototypes/> </discovery_rule> </discovery_rules> <macros/> <templates/> <screens/> </template> </templates> <triggers> <trigger> <expression>{Template SNMP HP Server Summary exp:cpqHeResilientMemCondition.0.last(0)}>2</expression> <name>{HOST.NAME}: Resilient Memory Condition is Not OK</name> <url/> <status>0</status> <priority>1</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template SNMP HP Server Summary exp:cpqHeMibCondition.0.last(0)}<>2</expression> <name>{HOST.NAME}: Server Condition is Not OK</name> <url/> <status>1</status> <priority>3</priority> <description>The overall condition. This object represents the overall status of the server health system represented by this MIB.</description> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template SNMP HP Server Summary exp:cpqHeThermalCondition.0.last(0)}<>2</expression> <name>{HOST.NAME}: Termal Condition is Not OK</name> <url/> <status>0</status> <priority>3</priority> <description/> <type>0</type> <dependencies/> </trigger> <trigger> <expression>{Template SNMP HP Server Summary exp:cpqHeMibCondition.0.nodata(3600)}=1</expression> <name>{HOST.NAME} no SNMP data</name> <url/> <status>0</status> <priority>2</priority> <description>От узла не было новых SNMP-данных за определенный промежуток времени</description> <type>0</type> <dependencies/> </trigger> </triggers> </zabbix_export>
Дополнительно, можно к шаблону выше присоединить следующий (собирает инвентаризационные данные, такие как версии ПО или серийные номера):
<?xml version="1.0" encoding="UTF-8"?> <zabbix_export> <version>2.0</version> <date>2013-10-01T05:29:18Z</date> <groups> <group> <name>SNMP</name> </group> </groups> <templates> <template> <template>Template HP SNMP Agent Inventar exp</template> <name>Template HP SNMP Agent Inventar exp</name> <groups> <group> <name>SNMP</name> </group> </groups> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <items> <item> <name>Contact</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.2.1.1.4.0</snmp_oid> <key>sysContact.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>1</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Enclosure Name</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.2.2.13.1.1.8.1</snmp_oid> <key>cpqSiRackEnclosureMgrName.1</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>1</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>!!!</description> <inventory_link>28</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 0 DisplayName</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.4.0</snmp_oid> <key>cpqHoFwVerDisplayName.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 0 Version</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.5.0</snmp_oid> <key>cpqHoFwVerVersion.0</key> <delay>9600</delay> <history>365</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 1 DisplayName</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.4.1</snmp_oid> <key>cpqHoFwVerDisplayName.1</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 1 Version</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.5.1</snmp_oid> <key>cpqHoFwVerVersion.1</key> <delay>9600</delay> <history>365</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 2 DisplayName</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.4.2</snmp_oid> <key>cpqHoFwVerDisplayName.2</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 2 Version</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.5.2</snmp_oid> <key>cpqHoFwVerVersion.2</key> <delay>9600</delay> <history>365</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 3 DisplayName</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.4.3</snmp_oid> <key>cpqHoFwVerDisplayName.3</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Firmware 3 Version</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.11.2.14.1.1.5.3</snmp_oid> <key>cpqHoFwVerVersion.3</key> <delay>9600</delay> <history>365</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>OS Desc</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.11.2.2.3.0</snmp_oid> <key>cpqHoDesc.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The version of the host OS.</description> <inventory_link>6</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>OS Name</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.11.2.2.1.0</snmp_oid> <key>cpqHoName.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The version of the host OS.</description> <inventory_link>16</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>OS Version</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.11.2.2.2.0</snmp_oid> <key>cpqHoVersion.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The version of the host OS.</description> <inventory_link>7</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Physical Location</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.2.1.1.6.0</snmp_oid> <key>sysLocation.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>1</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description>The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</description> <inventory_link>0</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Product ID</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.2.2.2.6.0</snmp_oid> <key>cpqSiSysProductId.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>9</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Product Name</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.2.2.4.2.0</snmp_oid> <key>cpqSiProductName.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>29</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Serial Number</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>1.3.6.1.4.1.232.2.2.2.1.0</snmp_oid> <key>cpqSiSysSerialNum.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>8</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> <item> <name>Server Role</name> <type>4</type> <snmp_community>{$SNMP_COMMUNITY}</snmp_community> <multiplier>0</multiplier> <snmp_oid>.1.3.6.1.4.1.232.11.2.2.6.0</snmp_oid> <key>cpqHoSystemRole.0</key> <delay>9600</delay> <history>30</history> <trends>365</trends> <status>0</status> <value_type>4</value_type> <allowed_hosts/> <units/> <delta>0</delta> <snmpv3_securityname/> <snmpv3_securitylevel>0</snmpv3_securitylevel> <snmpv3_authpassphrase/> <snmpv3_privpassphrase/> <formula>1</formula> <delay_flex/> <params/> <ipmi_sensor/> <data_type>0</data_type> <authtype>0</authtype> <username/> <password/> <publickey/> <privatekey/> <port>161</port> <description/> <inventory_link>2</inventory_link> <applications> <application> <name>HP Inventarisation</name> </application> </applications> <valuemap/> </item> </items> <discovery_rules/> <macros/> <templates/> <screens/> </template> </templates> </zabbix_export>
Администрирование → Общие → Макросы